STANDARDSNewage Stamford industrial generators meet the
requirements of BS EN 60034 and the relevant sectionof other international standards such as BS5000, VDE 0530, NEMA MG1-32, IEC34, CSA C22.2-100, AS1359.Other standards and certifications can be considered on request.
WINDINGS & ELECTRICAL PERFORMANCE
All generator stators are wound to 2/3 pitch. This
eliminates triplen (3rd, 9th, 15th …) harmonics on the
voltage waveform and is found to be the optimum
design for trouble-free supply of non-linear loads. The
2/3 pitch design avoids excessive neutral currents
sometimes seen with higher winding pitches, when in
parallel with the mains. A fully connected damper
winding reduces oscillations during paralleling. This
winding, with the 2/3 pitch and carefully selected pole
and tooth designs, ensures very low waveform
distortion.
TERMINALS & TERMINAL BOX
Standard generators are 3-phase reconnectable with 12
ends brought out to the terminals, which are mounted
on a cover at the non-drive end of the generator. A
sheet steel terminal box contains the AVR and provides
ample space for the customers' wiring and gland
arrangements. It has removable panels for easy
access.
SHAFT & KEYS
All generator rotors are dynamically balanced to better
than BS6861:Part 1 Grade 2.5 for minimum vibration in
operation. Two bearing generators are balanced with a
half key.
INSULATION/IMPREGNATION
The insulation system is class 'H'.
All wound components are impregnated with materials
and processes designed specifically to provide the high
build required for static windings and the high
mechanical strength required for rotating components.
QUALITY ASSURANCE
Generators are manufactured using production
procedures having a quality assurance level to BS EN
ISO 9001.
The stated voltage regulation may not be maintained in
the presence of certain radio transmitted signals. Any
change in performance will fall within the limits of
Criteria 'B' of EN 61000-6-2:2001. At no time will the
steady-state voltage regulation exceed 2%

Alternador Stamford UCDI274K, 4P, 3F, Brushless, AVR, 1500/1800RPM, 50/60 Hz, 250/312,5 KVA

Alternator Leroy Somer TAL044-M M6S/4, 4P, 3F, Brushless, AVR, 1500/1800RPM, 50/60 Hz, 200/250KVA

PERFORMANCE
The TAL alternator range is designed to meet the general needs of stand-by and prime power applications in telecom, commercial and industrial markets..

RELIABLE
All products in the TAL series are manufactured to Leroy-Somer high quality standards and are built with class H insulation materials.

Genuine Product! - Worldwide Shipping

SAE 1/14"

Alternator Leroy Somer TAL040-F M6S/4, 4P, 3F, Brushless, AVR, 50/60 Hz, 20/25KVA, SAE 3/11,5"

Nidec Leroy-Somer TAL 040 F (single phase dedicated, 60 Hz) alternator has been designed to offer you the best power generation performances. With its meticulous design and optimized architecture, the TAL 040 strikes the perfect balance between compactness, reliability, performance and longevity.

Whatever your application, the TAL 040 will meet your needs and will adapt to all situations.

Nidec Leroy-Somer TAL 040 alternator meets all key international standards and regulations, including IEC 60034, NEMA MG 1.32-33, ISO 8528-3, CSA C22.2 n°100-14 and UL 1446 (UL 1004 on request).

Also compliant with IEC 61000-6-2, IEC 61000-6-3, IEC 61000-6-4, VDE 0875G, VDE 0875N and EN 55011, group 1 class A for European zone.

Nidec Leroy-Somer TAL 040 alternator can be integrated in EC marked generator set, and bears EC, EAC and CMIM markings.

It is designed, manufactured and marketed in an ISO 9001 and ISO 14001 quality assurance environment.

• Class H insulation
• Shunt excitation
• Optimized performance
• Degree of protection: IP 23
• Complete winding protection for non-harsh environment with relative humidity ≤ 95%
• Compact and rugged assembly to withstand engine vibrations
• Steel frame
• Aluminum flanges and shields
• Single-bearing design compatible with most diesel engines
• Greased for life bearings
• Direction of rotation: clockwise and counterclockwise without derating
• Easy access to AVR and terminals

Options:

• ULc/us
• Customized painting (unpainted machine as standard)
• Space heater
• Flying leads
• Reinforced winding protection for harsh environments and relative humidity greater than 95% (system 2 - 4 without derating)

Genuine Product! - Worldwide Shipping