PVP no incluye IVA
Manufacturer | Stamford |
PVP no incluye IVA
Stamford Alternator Diode Set (RSK-6001)
Manufacturer | Stamford |
PVP no incluye IVA
Stamford rotary diode bridge (RSK-1101)
Manufacturer | Stamford |
PVP no incluye IVA
Stamford rotary diode bridge UCDI274K (45-0428)
Manufacturer | Stamford |
PVP no incluye IVA
Stamford diodes-varistor kit (RSK-2001)
Manufacturer | Stamford |
PVP no incluye IVA
Stamford varistor diode kit (RSK-5001)
Manufacturer | Stamford |
PVP no incluye IVA
The SX460 was replaced by the latest new model AS 440.
sX460 is a half-wave phase-controlled thyristor type Automatic Voltage Regulator (AVR) and forms part of the excitation system for a brush-less generator.
In addition to regulating the generator voltage, the AVR circuitry includes under-speed and sensing loss protection features. Excitation power is derived directly from the generator terminals.
INPUT | Voltage Jumper selectable |
95-132V AC or | |
190-264V AC | |
Frequency 50-60 Hz nominal | |
Phase 1 | |
OUTPUT | Voltage max 90V dc at 207V ac input |
Current continuous 4 A dc | |
Intermittent 6 A for 10 secs | |
Resistance 15 ohms minimum | |
REGULATION | +/- 1.5% |
THERMAL DRIFT | 0.05% per deg. C change in AVR ambient |
TYPICAL SYSTEM RESPONSE | AVR response 20 ms |
Filed current to 90% 80 ms | |
Machine Volts to 97% 300 ms | |
EXTERNAL VOLTAGE ADJUSTMENT | +/-10% with 1 k ohm 1 watt trimmer |
UNDER FREQUENCY PROTECTION | Set point 95% Hz |
Slope 170% down to 30 Hz | |
UNIT POWER DISSIPATION | 10 watts maximum |
BUILD UP VOLTAGE | 4 Volts @ AVR terminals |
ENVIRONMENTAL | Vibration 20-100 Hz 50mm/sec |
100Hz – 2kHz 3.3g | |
Operating temperature -40 to +70°C | |
Relative Humidity 0-70°C 95% | |
Storage temperature -55 to +80°C |
Manufacturer | Stamford |
PVP no incluye IVA
AVR AS440 24403/1P
Genuine Stamford
In stock
1 year warranty
Manufacturer | STAMFORD |
PVP no incluye IVA
Stamford AVR Alternator Regulator Card AS480 UL E000-14808/1P Stamford
Manufacturer | Stamford |
PVP no incluye IVA
General description
MX341 is a two phase sensed Automatic Voltage Regulator and forms part of the excitation system for a brush-less generator. Excitation power is derived from a
three-phase permanent magnet generator (PMG), to isolate the AVR control circuits from the effects of nonlinear loads and to reduce radio frequency interference on
the generator terminals. Sustained generator short circuit current is another feature of the PMG system.
The AVR senses the voltage in the main generator winding and controls the power fed to the exciter stator and hence the main rotor to maintain the generator output
voltage within the specified limits, compensating for load, speed, temperature and power factor of the generator.
Soft start circuitry is included to provide a smooth controlled build up of generator output voltage.
A frequency measuring circuit continually monitors the shaft speed of the generator and provides under-speed protection of the excitation system by reducing the generator output voltage proportionally with speed below a pre-settable threshold. A further enhancement of this feature is an adjustable volts per Hertz slope to improve engine recovery time on turbo charged engines. Soft start
circuitry is included to provide a smooth controlled build up of generator output voltage.
Uncontrolled excitation is limited to a safe period by internal shutdown of the AVR output device. This condition remains latched until the generator has stopped.
Provision is made for the connection of a remote voltage trimmer, allowing the user fine control of the generator's output.
An analogue input is provided allowing connection to a Newage Power Factor controller or other external devices with compatible output.
The AVR has the facility for droop CT connection, to allow parallel running with other similarly equipped generators.
Manufacturer | Stamford |