InteliDrive Mobile

• Diesel/gas engine control, monitoring and protection for off-road applications such as construction, quarrying and engineering equipment
• Control of hydraulic systems and engine driven compressors and pumps
• Designed for harsh environments - the unit construction features a fully environmentally sealed enclosure and connector
• Plug & Play EFI (ECU) engine support (CAN/J1939)
• Master Slave Concept Support
• Remote monitoring support
• Fleet management via GPRS/GPS, GeoFencing
• Integrated PLC functions: Analog switches, Comparators with delay or hysteresis, Counters, Delay functions, Filters, Linear interpolation, Logical and Mathematical functions, PID loops, Timers
• Built-in event & Performance Log
• History log out – monitoring of wide range of parameters
• 4 Binary inputs with detection of broken wire
• 12 Binary bi-directional inputs for contacts switching
• 8 Binary configurable switches (High-side/Low-side 3A, PWM 3A, DC motor driver)
• 8 Binary Hi-side switches with max. current 3A and detection of broken wire
• 8 Analog configurable inputs for industry standard sensors
• 8 Analog configurable inputs/outputs
• 2 Impulse inputs for rotary flowmeters
• 4 Frequency inputs for RPM measurement
• Running-hours meter, number of starts counter
• Integral fuel consumption measuring
• Communication interface: RS485, 2xCAN, J1939
• 3 various displays via CAN bus
• Functional safety according to IEC 61508
• EMC compatibility, Vibration resistivity
• Dust and water protection IP 67
• Operating temperature: –40 to +80°C
• Internal GPS and GPRS modem (Optional)

InteliBifuel Bi-fuel/dual

InteliBifuel package is a fully programmable solution designed for any single speed Bi-fuel application, with its features perfectly suitable for Oil & Gas, Mining and Rental applications.

• NEW algorithm with automatic compensation for gas quality changes
• Enable factory setting of Bi-fuel system
• Simplified installation and commissioning
• Extended PLC logic and history
• GPRS/GSM remote monitoring
• IP-69 enclosure fits to any application
• Optional high pressure single point gas injection after turbocharger
• Compatible with InteliVision displays

InteliNano NT MRS 3 – ComAp

Gen-set controller for prime power applications with 3 phase voltage & current measurement

• Controller for single gen-set operating in prime power applications
• 3 Phase generator voltage & current measurement
• Power measurement and energy counters
• Connection type and voltage auto detect
• Generator and engine protections 
• Symbolic interface
• Automatic or manual GCB control
• "Zero" power consumption mode
• Battery voltage, Service time and Running hours indication
• Automatic recharge of batteries
• Configurable via front panel
• Light Tower mode supported
• Event log (15 events)
• Up to 6 inputs /  Up to 6 outputs
• 2 high current outputs, for Starter and Fuel Solenoid, internally connected to the Emergency Stop input
• D+ pre-excitation terminal
• Magnetic pickup
• ECU support (CAN J1939) 
• USB one-cord power supply and programing
• Standard cut-out dimension 96x96
• Outside dimension 110x100

InteliLite NT MRS 3 – ComAp

Manual Remote Start (MRS) Gen-set Controller

• Compact gen-set controller for single operating genset
• Manual and remote start (MRS) applications
• Easy to setup
• Wide gen-set monitoring and protection
• Running hours event and performance log
• Multiple languages (user changeable) in controller, even more in installation suite
• Plug-in extension modules capability
• Automatic SMS on alarm or event & gen-set control over SMS (* Plug-in module required)
• Modbus
• Automatic GCB control
• D+ preexcitation terminal
• True RMS measurement
• 3 phase power measurement
• 3 configurable analog inputs
• 4 binary inputs
• 4 binary outputs

InteliLite NT MRS 4 – ComAp

Manual Remote Start (MRS) Gen-set Controller

·        Compact gen-set controller for single operating genset

·        Manual and remote start (MRS) applications

·        Easy to setup

·        Wide gen-set monitoring and protection

·        Outstanding EFI engine support with diagnostic messages in plain text via J1939

·        Running hours event and performance log

·        Multiple languages (user changeable) in controller, even more in installation suite

·        Plug-in extension modules capability

·        Automatic SMS on alarm or event & gen-set control over SMS (*Plug-in module required)

·        Modbus

·        Automatic GCB control

·        D+ preexcitation terminal

·        True RMS measurement

·        3 phase power measurement

·        3 configurable analog inputs

·        4 binary inputs

·        4 binary outputs

InteliLite NT AMF 8 – ComAp

Auto Mains Failure (AMF) Gen-set Controller

• Compact gen-set controller for single genset operating in standby prime power modes
• Meets all requirements for Auto Mains Failure (AMF) applications
• Easy to setup
• Wide gen-set monitoring and protection
• Running hours event and performance log
• Multiple languages (user changeable) in controller, even more in installation suite
• Plug-in extension modules capability

·        Automatic SMS on alarm or event & gen-set control over SMS (*Plug-in module required)

• Modbus
• Supports prime power (MRS) applications
• Automatic and manual GCB and MCB control
• D+ preexcitation terminal
• True RMS measurement
• 3 phase power measurement
• 3 configurable analog inputs
• 4 binary inputs
• 6 binary outputs 

InteliLite 9 - ComAp (IL3LAMF9BAA)

Auto Mains Failure (AMF) Gen-set Controller

• Compact gen-set controller for single genset operating in standby and prime power modes
• Easy to setup
• Wide gen-set monitoring and protection
• Outstanding EFI engine support with diagnostic messages in plain text via J1939
• Running hours event and performance log
• Multiple languages (user changeable) in controller, even more in installation suite
• Plug-in extension modules capability

·        Automatic SMS on alarm or event & gen-set control over SMS (*Plug-in module required)

• Modbus
• Supports prime power (MRS) applications
• Automatic and manual GCB and MCB control
• D+ preexcitation terminal
• True RMS measurement
• 3 phase power measurement
• 3 configurable analog inputs
• 4 binary inputs
• 6 binary outputs

InteliLite MRS 11 - ComAp

Next generation of Manual & Remote Start (MRS) gen-set controller

New generation of one of the world's most successful controllers in its class.

Single gen-set controller for prime power applications.

• Single gen-set controller for prime power applications
• Easy to install, configure and use
• 5 languages in the controller
• 3 level of password
• 3 sets of alternative configuration
• Direct communication with EFI engines
• Tier 4 final ready
• Remote monitoring and control
• Wide range of communication capabilities including:
  • connection via RS232, RS485, CAN and on board USB
  • internet access using Ethernet
  • Modbus (TCP/RTU)
• Active SMS and emails in different languages
• In-built PLC, complemented with a PLC monitoring tool in InteliConfig
• 6 binary inputs, 3 analog inputs and 6 binary outputs on-board
• 2 x high current binary outputs for cranking and fuel solenoid
• More I/Os available over plug-in or CAN modules (CM-BIO8-EFCP, Inteli AIN8, Inteli IO8/8, IGS-PTM)
• Remote Annunciator over CAN
• 1 slot for plug-in modules
• Real time clock
• Multipurpose flexible timers
• Flexible event based history with up to 350 events
• True RMS measurement
• Comprehensive protections
• UL Listed

InteliCompact NT SPtM – ComAp

Gen-set Controller for Gensets in Parallel to Mains Applications

• Compact genset controller for single genset operating in Parallel to Mains mode or Auto Mains Failure (AMF) mode with no-break transfers
• Meets all requirements for AMF applications
• Forward and reverse synchronizing
• Peak shaving, Peak lopping
• Load, speed, voltage and power factor control
• High tariff avoidance
• Mains import/export
• Full gen-set monitoring and protection
• Possibility to connect up to 8 gauges to display engine values
• True voltage and current RMS measurement
• Outstanding EFI engine support (CAN/J1939, RS232/Modbus) with diagnostic messages in plain text
• 3 phase generator voltage and current measurement
• 3 phase mains voltage measurement
• 3 phase power measurement
• 1 phase mains current measurement
• Additional 7 binary inputs/outputs via IC-NT CT-BIO7 (in total up to 16 inputs/15 outputs)
• 3 analog inputs
• RS232, RS485, USB, Modbus, GSM/Analog Modem, Internet communication*
• GPRS communication and IC-NT RD (remote display) software
• AirGate and WebSupervisor support
• 2 languages (user changeable)
• IC-NT CT-BIO7 extension plug-in module included

InteliCompact NT MINT – ComAp

Genset Controller for Gensets in Multiple Parallel Applications

• Compact genset controller for gensets operating in multiple island and/or parallel to mains mode (together with MainsCompact NT)
• Advanced Power Management for up to 32 gensets allowing
  • Load demand Start/Stop function
  • Load demand Swapping of different size gensets
  • Running Hours equalization
• Active Load and VAr sharing
• Full gen-set monitoring and protection
• Possibility to connect up to 8 gauges to display engine values
• True voltage and current RMS measurement
• Outstanding EFI engine support (CAN/J1939, RS232/Modbus) with diagnostic messages in plain text
• 3 phase generator voltage and current measurement
• 3 phase busbar voltage measurement
• 3 phase power measurement
• 3 analog inputs
• RS232, RS485, USB, Modbus, GSM/Analog Modem, Internet communication (*Relevant plug-in module is required)
• GPRS communication and IC-NT RD (remote display) software
• AirGate and WebSupervisor support
• Support of active SMS Events or Commands
• Event and performance log
• 2 languages (user changeable)