PVP no incluye IVA
InteliVision 5 – ComAp
5,7" Colour Display Unit
InteliVision 5, industrial operator panel equipped with 5,7” colour screen, is dedicated together with the main ComAp controller to visualise and control single gen-set in various applications.
IMPORTANT COMPATIBILTY NOTICE :
It is recommended to upgrade both display unit and controller firmware to the newest version in order to fully utilize features of ScreenEditor within GenConfig.
Manufacturer | ComAp |
PVP no incluye IVA
InteliVision 5 CAN – ComAp
5,7" Colour Display Unit with CAN Bus Interface
InteliVision 5 CAN, industrial operator panel equipped with 5,7” colour screen, is dedicated together with the main ComAp controller to visualise and control single engines in various applications.
Manufacturer | ComAp |
PVP no incluye IVA
InteliVision 8 – ComAp
8" Colour Display Unit
InteliVision 8, industrial operator panel equipped with 8” colour screen, is dedicated together with the main ComAp controller to visualise and control single gen-set in various applications.
Manufacturer | ComAp |
PVP no incluye IVA
InteliVision 8 Marine – ComAp
Marine Approved 8" Colour Display Unit for InteliGen NT/InteliSys NT and InteliDrive Family of Controllers
Manufacturer | ComAp |
PVP no incluye IVA
InteliVision 12Touch - ComAp
12,1" Colour Display Unit
InteliVision 12Touch, industrial operator panel equipped with 12,1” colour, multi-touch screen, is dedicated together with the main ComAp controller to visualise and control single gen-set in various applications.
Manufacturer | ComAp |
PVP no incluye IVA
InteliPro – ComAp
Utility Protection Relay
InteliPro is highly flexible mains decoupling relay with extensive range of protective functions to meet the strictest utility interconnection requirements. It can be used in various distributed generation applications, cogeneration units, renewable energy sources or as a redundant/back-up protection for gen-sets.
Key functions
InteliPro is 100% replacement of the successful product InteliProtec.
Manufacturer | ComAp |
PVP no incluye IVA
InteliPro SYNC - ComAp
Synchronization and protection relay
InteliPro SYNC is a highly reliable protection relay designed for synchronization in parallel to mains applications, such as generators, gen-sets and cogeneration units connected to distribution network. InteliPro SYNC is an ideal substitute for manual synchronizing relay.
Key features
Manufacturer | ComAp |
PVP no incluye IVA
MainsPro – ComAp
Mains Decoupling Relay
MainsPro is a protection relay for parallel-to-mains applications, including generator sets, cogeneration units, micro turbines or renewable energy sources such as photovoltaic plants or wind turbines. It provides adjustable voltage, frequency and loss of mains protections to safeguard both the distribution network and the generators.
Key features
MainsPro is a 100% replacement for the successful product NPU-FUV.
Manufacturer | ComAp |
PVP no incluye IVA
InteliGen NT BaseBox – ComAp
Complex Parallel Gen-set Controller with Detachable Colour Display
Marine certified controller.
Manufacturer | ComAp |
PVP no incluye IVA
Complex Parallel Gen-set Controller with Detachable Colour Display
- Gen-set controller for both single and multiple gensets operating in standby or paralleling modes.
- To be used in conjunction with detachable colour displays InteliVision 5, InteliVision 8 or InteliVision 12Touch
- Support of engines with ECU (Electronic Control Unit)
- Complete integrated gen-set solution and signal sharing via CAN bus – minimum external components needed
- Many communication options - Ethernet connection (RJ45), USB 2.0 slave interface, 1× RS232 / 2× RS485 interface with Modbus protocol support; Analog / GSM / ISDN / CDMA modem communication support; SMS messages; ECU Modbus interface; isolated secondary RS485
- AirGate support – easy remote supervising and servicing
- Automatic synchronizing and power control (via speed governor or ECU)
- AMF function, Baseload, Import / Export, Peak shaving, Voltage and PF control (AVR)
- Generator measurement: U, I, Hz, kW, kVAr, kVA, PF, kWh, kVAhr
- Mains measurement: U, I, Hz, kW, kVAr, PF
- Selectable measurement ranges for AC voltages and currents – 120 / 277 V, 0–1 / 0–5 A
- Inputs and outputs configurable for various customer needs
- Bipolar binary outputs - possibility to use BO as High or Low side switch
- Controller redundancy
- Event-based history (up to 1000 records) with customer-selectable list of stored values; RTC; statistic values
- Integrated PLC programmable functions
- Integrated fixed and configurable protections
- DIN-Rail mount
Marine certified controller.
Manufacturer | ComAp |
The controllers are automatic control systems for the handling of generating sets. They consist of a device containing indispensable software for manoeuvring and calibrating power generating machines. Thanks to the control units it is possible to monitor all parameters, monitor and calibrate the levels of the generating sets.
They are high-tech controllers that allow the supervision, both manually and automatically, of the starting, stopping and protection systems of the main systems that make up the energy supply machines. The central units for generators are suitable for emergency installations (mains voltage failure) or for autonomous generating sets (voltage-free contact starting).
Depending on the type of controller a generator set requires, it may offer more or less functionality. However, they all offer a manufacturer's guarantee in accordance with international standards.
The controllers are able to offer a very fast response to control the different parameters to be analyzed. They usually have a screen to show any change, alarm or sound defect. In the product cards are detailed the characteristics of each model of controller for generating sets.