The DSE7410 MKII is an Auto Start Control Module  suitable for a wide
variety of single, diesel or gas, gen-set applications.

Monitoring an extensive number of engine parameters, the module will
display warnings, shutdown and engine status information on the
back-lit LCD screen, illuminated LEDs,remote PC and via SMS text alerts
(with external modem).

The module include USB, RS232, RS485 and Ethernet ports as well as dedicated DSENet® terminals for system expansion.

The module are compatible with electronic (CAN) and non-electronic (magnetic pick-up/alternator sensing)engines and offer an extensive number of flexible inputs, outputs and extensive engine protections so the system can be easily adapted to meet the most demanding industry requirements.

The extensive list of features includes enhanced event and performance monitoring, remote communications & PLC functionality.
Dual mutual standby is now available on the DSE7410 MKII using RS232 or RS485
communications. This provides for a simpler and more convenient installation with more advanced features such as true hours balancing.

SPECIFICATIONS

DC SUPPLY
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
5 V for up to 1 minute

CRANKING DROPOUTS
Able to survive 0 V for 100 mS, providing
supply was at least 10 V before dropout and
supply recovers to 5 V. This is achieved
without the need for internal batteries.
LEDs and backlight will not be maintained
during cranking.

MAXIMUM OPERATING CURRENT
510 mA at 12 V, 240 mA at 24 V

MAXIMUM STANDBY CURRENT
330 mA at 12 V, 160 mA at 24 V
CHARGE FAIL/EXCITATION RANGE
0 V to 35 V

GENERATOR & MAINS (UTILITY)
VOLTAGE RANGE
15 V to 415 V AC (Ph to N)
26 V to 719 V AC (Ph to Ph)
FREQUENCY RANGE
3.5 Hz to 75 Hz

MAGNETIC PICKUP
VOLTAGE RANGE
+/- 0.5 V to 70 V
FREQUENCY RANGE
10,000 Hz (max)

INPUTS
DIGITAL INPUTS A TO H
Negative switching
ANALOGUE INPUTS A, B, E & F
Configurable as:
Negative switching digital input
0 V to 10 V sensor
4 mA to 20 mA sensor
Resistive sensor
ANALOGUE INPUTS C & D
Configurable as:
Negative switching digital input
Resistive sensor

OUTPUTS
OUTPUT A & B (FUEL & START)
15 A DC at supply voltage
OUTPUTS C & D
8 A AC at 250
V AC (Volt-free)
AUXILIARY OUTPUTS E, F, G, H, I & J
2 A DC at supply voltage

DIMENSIONS
OVERALL
245 mm x 184 mm x 51 mm
9.6” x 7.2” x 2.0”
PANEL CUT-OUT
220 mm x 160 mm
8.7” x 6.3”
MAXIMUM PANEL THICKNESS
8 mm
0.3”

STORAGE TEMPERATURE RANGE
-40°C to +85 °C
-40 °F to +185 °F

OPERATING TEMPERATURE RANGE
NON-HEATED DISPLAY VARIANT
-30°C to +70 °C
-22 °F to +158 °F
HEATED DISPLAY VARIANT
-40 °C to +70 °C
-40 °F to +158 °F

SPECIFICATION     DSEA109

POWER SUPPLY
VOLTAGE RANGE
100 V AC to 270 V AC (Ph to N & Ph to Ph)

FREQUENCY RANGE
40 Hz to 400 Hz

ALTERNATOR OUTPUT SENSING

VOLTAGE RANGE
15 V AC to 600 V AC (Ph to N & Ph to Ph)

FREQUENCY RANGE
40 Hz to 65 Hz

EXCITATION OUTPUT

EXCITER FIELD WINDING
IMPEDANCE
5 Ω to 50 Ω

CONTINUOUS VOLTAGE RATING
0 V DC to 100 V DC

CONTINUOUS CURRENT RATING
0 A DC to 7 A DC

MAXIMUM CURRENT RATING
15 A DC for 10 seconds

QUADRATURE DROOP CT

MAXIMUM SECONDARY CURRENT
5 A AC

BURDEN
0.25 VA

ACCURACY
1%

REMOTE VOLTAGE ADJUSTMENT
POTENTIOMETER
5 kΩ

VOLTAGE INPUT
-10 V DC to 10 V DC

DIMENSIONS

OVERALL
180mm x 145 mm x 61 mm
7.0” x 5.7” x 2.4”

STORAGE TEMPERATURE RANGE
-40 °C to +85 °C
-40 °F to +185 °F

OPERATING TEMPERATURE RANGE
-40 °C to +70 °C
-40 °F to +158 °F

WEIGHT
0.46 kg.

IG-MTU Mains Transformer Unit ComAp (IG-MTU)

• Set of 3 mains voltage transformers 400V/230V
• Galvanic separation of the mains and generator voltage
• For three wire system, system with separated Neutral or when galvanic separation between generator or mains voltage and controller is required

Product description

• The InteliDrive BaseBox is flexible controller mainly for Gas compression market
• Preconfigured functions for compression applications
• Provides control, monitoring and protection gas/diesel engine and application side as well

Key features

• Large built-in PLC to suit individual needs
• Lock&hide with PLC functionality by 3 level password
• UL Listed Class1, Division 2 certification
• Built-in Ethernet, RS485, 2x CAN communications
• Availability of Air-Fuel Ratio for gas engines (ISAFC-PCM Dongle)
• Analog outputs
• Predefined protections
• 16 BIN, 16 BOUT, 4 AIN, 2 AOUT on board (Speed governor configurable as LAI)
• Load sharing functions
• Virtual shared inputs / outputs via CAN
• Cloud-based monitoring via ComAp WebSupervisor

Application overview

• Single / Variable speed engine operation
• Pump / Compressor application

ID-COM Communication Module - HW version 2.0 ComAp (ID-COM)

The ID-COM offers: 

• Communication module for multiple engine installations, remote displays and redundancy communication
• Interface for CAN1 Extension and J1939 modules
• Interface for CAN2 Inter-controller
• Interface for RS485 - Supported on InteliDrive DCU HW 2.0+ only 
• Inter-controller Interface for J1708 - Communication protocol J1587
• Approved by ABS, BV, CCS, CRS, DNV, KRS, LR, RINA, RRR, RS
• Supports only ID-DCU Marine and ID-DCU Industrial controllers

DSE7450 DC/Hybrid Generator Control Module The DSE 7450 is a control module designed to control DC/Hybrid generators in supplying both a load and/or the charging of batteries.

InteliLite 4 AMF 25 (IL4AMF25BAA) ComAp

InteliLite 4 AMF 25 an advanced single gen-set controller for stand-by and prime power applications. Intuitive, flexible, easy to install and use, the InteliLite 4 AMF 25 controller offers multiple configuration options to create the best solution for controlling and monitoring your gen-sets both on-site and remotely.