DSE2130 Input Expansion Module

-30 oC to +70 oC

-40 oC to +85 oC

DSE 2548  Specification

DC SUPPLY

CONTINUOUS VOLTAGE RATING

8 V to 35 V Continuous

CRANKING DROPOUTS

Able to survive 0 V for 50 mS, providing

supply was at least 10 V before dropout

and supply recovers to 5 V. This is

achieved without the need for internal

batteries. LEDs and backlight will not be

maintained during cranking.

MAXIMUM OPERATING CURRENT

112 mA at 12 V, 53 mA at 24 V

MAXIMUM STANDBY CURRENT

74 mA at 12 V, 35 mA at 24 V

DIMENSIONS

OVERALL

180 mm x 116 mm x 42.7 mm

7.07” x 4.57” x 1.68”

PANEL CUT-OUT

154 mm x 98 mm

6.06” x 3.86”

MAXIMUM PANEL THICKNESS

8 mm

0.3”

DSE 857 Specification

DC SUPPLY

CONTINUOUS VOLTAGE RATING

8 V to 35 V Continuous

CRANKING DROPOUTS

Able to survive 0 V for 100 mS, providing

supply was at least 10 V before dropout and supply recovers to 5 V. This is

achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.

MAXIMUM OPERATING CURRENT

123 mA at 12 V

71 mA at 24 V

MAXIMUM STANDBY CURRENT

104 mA at 12 V

63 mA at 24 V

COMMUNICATIONS

USB (Single DSE Controller) RS485

DIMENSIONS

OVERALL35 mm x 97 mm x 102 mm

1.4” x 3.8” x 4.0”MOUNTING

DIN Rail

OPERATING TEMPERATURE RANGE-30 °C to +70 °C

-22 °F to +158 °F

STORAGE TEMPERATURE RANGE-40 °C to +80 °C

-40 °F to +176 °F

AUTO START & AUTO MAINS FAILURE CONTROL MODULES

Monitoring engine speed, oil pressure, coolant temperature, frequency, voltage, current, power and fuel level, the modules provide engine and alternator protection. All this information is indicated on a large backlit LCD text display through a series of warning lights, electrical shutdown alarms and shutdown alarms in several languages. 

J1939 (CAN) converter, non-electronic MPU and alternator detection with support for diesel, gas and petrol engines, all in one variant. With a flexible number of inputs and outputs with their respective protections, the modules can easily be adapted to suit a wide range of applications.

Via USB communication both modules can be configured using the PC software DSE Configuration Suite or via the front panel editor of the module editor.

Using the DSE Configuration Suite the controller is easy to use and configure, allowing the operating parameters sequences, timers and alarms to be set or modified.

SPECIFICATIONSDC SUPPLY
CONTINUOUS VOLTAGE RATING
5 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 100 mS, providing
supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved
without the need for internal batteries.
LEDs and backlight will not be maintained
during cranking.
MAXIMUM OPERATING CURRENT
530 mA at 12 V, 280 mA at 24 V
MAXIMUM STANDBY CURRENT
320 mA at 12 V, 160 mA at 24 V
MAINS (UTILITY) & BUS
VOLTAGE RANGE
15 V to 415 V AC (Ph to N)
25 V to 719 V AC (Ph to Ph)
Frequency RANGE
3.5 Hz to 75 Hz
INPUTS
DIGITAL INPUTS A TO L
Negative switching
OUTPUTS
OUTPUTS C & D
8 A at 250 V AC (Volt free)
AUXILIARY OUTPUTS E to J
2 A DC at supply voltage
DIMENSIONS
OVERALL
245 mm x 184 mm x 51 mm
9.6” x 7.2” x 2.0”
PANEL CUT-OUT
220 mm x 160 mm
8.7” x 6.3”
MAXIMUM PANEL THICKNESS
8 mm
0.3”
OPERATING TEMPERATURE RANGE
-30°C to +70°C
-40°F to +185°F
STORAGE TEMPERATURE RANGE
-40°C to +85°C
-40°F to +185°F

SPECIFICATIONS

MAXIMUM OPERATING/STANDBY CURRENT

230 V (0327-01):Typical @ 230 V, 50 HzS1

I RMS = 75 mA, Power = 0.9 W S2

I RMS = 50 mA, Power = 0.6 W110 V (0327-02):

Typical @ 110 V, 50 HzS1

I RMS = 70 mA, Power = 0.8 W S2

I RMS = 50 mA, Power = 0.5 W VOLT FREE OUTPUTS

START/RUN N/C5 A, 250 V ACLOADING OUTPUT x2

5 A, 250 V ACS1 & S2

110 V (0327-02):

VOLTAGE RANGE

110 V - 50Hz to 70 Hz85V to 150 V AC (L-N)230 V (0327-01)

VOLTAGE RANGE

230 V - 40Hz to 60 Hz180 V to 300 V AC (L-N)DIMENSIONS

OVERALL72mm x 90.5 mm x 65 mm

2.8" x 3.6" x 2.6"WEIGHT

0.3 kg OPERATING TEMPERATURE RANGE

-30°C to +70°C STORAGE TEMPERATURE RANGE

-40°C to +80°C

SPECIFICATIONS

MAXIMUM OPERATING/STANDBY CURRENT

230 V (0327-01):Typical @ 230 V, 50 HzS1

I RMS = 75 mA, Power = 0.9 W S2

I RMS = 50 mA, Power = 0.6 W110 V (0327-02):

Typical @ 110 V, 50 HzS1

I RMS = 70 mA, Power = 0.8 W S2

I RMS = 50 mA, Power = 0.5 W VOLT FREE OUTPUTS

START/RUN N/C5 A, 250 V ACLOADING OUTPUT x2

5 A, 250 V ACS1 & S2

110 V (0327-02):

VOLTAGE RANGE

110 V - 50Hz to 70 Hz85V to 150 V AC (L-N)230 V (0327-01)

VOLTAGE RANGE

230 V - 40Hz to 60 Hz180 V to 300 V AC (L-N)DIMENSIONS

OVERALL72mm x 90.5 mm x 65 mm

2.8" x 3.6" x 2.6"WEIGHT

0.3 kg OPERATING TEMPERATURE RANGE

-30°C to +70°C STORAGE TEMPERATURE RANGE

-40°C to +80°C

DSE2520 Remote Display Module (Auto Mains (Utility) Failure)

The DSE2520 remote display module is designed specifically for use with the DSE73xx control modules. A maximum of three remote display controls can be connected to a single host controller.

The remote display can be located up to a maximum of 1km away. Each remote display provides the same high level of instrumentation that can be found in the host control module. All remote displays connected show the same display information. The host controller can be configured to show different information.

DSE 855 MODULE SPECIFICATIONS SUPPLY

CONTINUOUS VOLTAGE RATING

8 V to 35 V Continuous

CRANKING DROPOUTS

Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout

and supply recovers to 5 V. This is achieved without the need for internal

batteries. LEDs and backlight will not be maintained during cranking.

MAXIMUM OPERATING CURRENT

123 mA at 12 V

71 mA at 24 V

MAXIMUM STANDBY CURRENT

104 mA at 12 V

63 mA at 24 V

COMMUNICATIONS

USB (Single DSE Controller) Ethernet

DIMENSIONS

OVERALL

35 mm x 97 mm x 102 mm

1.4” x 3.8” x 4.0”

MOUNTING

DIN Rail

OPERATING TEMPERATURE RANGE

-30 °C to + 70 °C

-22 °F to + 158 °F

STORAGE TEMPERATURE RANGE

-40 °C to + 80 °C

-40 °F to + 176 °F