LTS PANEL THREE PHASE 4 POLES 2000 AMP WITH MOTORIZED SELECTOR

Switching only switchboard (LTS)

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

LTS PANEL THREE PHASE 4 POLES 2500 AMP WITH MOTORIZED SELECTOR

Switching only switchboard (LTS)

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

LTS PANEL THREE PHASE 4 POLES 3200 AMP WITH MOTORIZED SELECTOR

Switching only switchboard (LTS)

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

4-POLE THREE-PHASE 25 AMP AUTOMATIC SWITCHGEAR (ATS) WITH

 CONTACTORS

This panel has a switchboard type DSE334 that detects when a mains failure occurs and sends a start-up signal to the switchboard type DSE3110, DSE6010 MKII, DSE7310 MKII or similar on the genset. Once turned on and ready, the DSE334 panel switchboard operates to enable the change of power supply (supplying the load of a facility) between the mains and the generator set and vice versa when the mains are restored. The transfer switch is formed by two contactors or motor driven selectors equipped with MECHANICAL AND ELECTRICAL INTER-LOCK. This panel applies to any generator set featuring any switchboard with remote control / start-up by signal feature.

AUTOMATIC TRANSFER SWITCH PANEL (ATS) 4 POLES THREE-PHASE 400 AMP | ABB MOTORIZED SELECTOR

Ask us about this product and its technical aspects.

We can configure it according to the customer's needs.*

*(subject to price changes due to modifications).

AUTOMATIC TRANSFER SWITCH PANEL (ATS) 4 POLES THREE-PHASE 800 AMP |  MOTORIZED SELECTOR 

This panel has a switchboard type DSE334 that detects when a mains failure occurs and sends a start-up signal to the switchboard type DSE3110, DSE6110 MKIII, DSE7320 MKII or similar on the genset. Once turned on and ready, the DSE334 panel switchboard operates to enable the change of power supply (supplying the load of a facility) between the mains and the generator set and vice versa when the mains are restored. The transfer switch is formed by two contactors or motor[1]driven selectors equipped with MECHANICAL AND ELECTRICAL INTER-LOCK. This panel applies to any generator set featuring any switchboard with remote control / start-up by signal feature.

FEATURES:

Control panel offered in a metal cabinet with an IP-67 protection grade with the following elements:

- Two contactors or a motor-driven selector, equipped with mechanical and electrical interlock, preventing them from being closed simultaneously, thus avoiding potential short circuits.

- Protection fuses.

- Terminal block for control and operation of the generator set.

- Terminal block for connection of the generator set input power cables, network input, and load output.

- Connection wiring of all the panel’s electrical items. Each wire is identified with its reference number in each end.

- Battery charger

- Transformers

- Emergency shutdown pushbutton.

- Ignition key (for switchboard supply)

- DSE 334 Switchboard

- Front door with lock.

- Bottom cap for wiring inlet

Dimensions: 1700x800x500 mm 180 Kg