DSE6010 MKII was designed to offer different levels of functionality through a common platform. This allows the user of Deep Sea Electronics equipment greater flexibility in choosing which controller to use for a specific application.

The control unit is designed to allow the operator to start and stop the generator and, if required, transfer the load to the generator manually or automatically.

With the Deep Sea Electronics 6010 control unit the user has the facility to view the operating parameters of the system via the LCD display.

The DSE6010 MKII module monitors the engine, indicating operational status and fault conditions, automatically stopping the engine indicating the fault condition and displaying it on the Deep Sea Electronics LCD screen.

This model has a powerful ARM processor and is a fundamental part of the module, allowing the incorporation of a complex range of features to be taken into account:

- Text displayed on the LCD screen.

- True RMS for voltage monitoring.

- Current and power monitoring.

- USB port connection.

- Motor parameter monitoring.

- Configurable inputs for use as alarms and other additional functions.

- ECU interface for electronic engines.

The use of a PC and Deep Sea Electronics configuration software allows modification of selected operating sequences, timers and alarms. In addition, the configuration editor integrated in the module allows instant adjustment of the information.

The DSE module has a robust plastic housing designed for easy mounting, connections to the module are made via connectors and sockets.

Access to critical operational sequences and timers can be used by qualified engineers for configuration and protected by a security code for restricted access. The control panel can also be protected by PIN code, parameters can be modified from the front panel of the module.

The DSE 7450 is a control module designed to control DC/Hybrid generators in supplying both a load and/or the charging of batteries.

Specific attention has been given to ensure this module has the necessary features to be configured for many different and challenging applications. Owing to the large number of monitoring points and the built in programmable logic controller, a wide number of operating modes can be realised. This provides the user with the ultimate flexibility in the engine control of the generator to ensure battery life optimisation, reduce engine maintenance/replacement and fuel usage.

The DSE7310 MKII is a powerful, new generation auto start genset control module with a highly sophisticated level of new features and functions, presented in the usual DSE user-friendly format. Suitable for a wide variety of single, diesel or gas Gen-set applications. 

Featuring a new Dual Core main processor and extended memory, the module provides faster and more powerful processing power, returning faster operational responses on intensive applications and increased functionality, with data logging facility. 

Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LED's, remote PC's and via SMS text alerts (with external communication device).

OVERALL SIZE

245 mm x 184 mm x 51 mm (9.6” x 7.2” x 2.0”)

PANEL CUTOUT SIZE

220 mm x 160 mm (8.7" x 6.3")

MAXIMUM PANEL THICKNESS

8.0 mm (0.3”)

WEIGHT

0.86kg

DSE2130 Input Expansion Module

AUTO START & AUTO MAINS FAILURE CONTROL MODULES

Monitoring engine speed, oil pressure, coolant temperature, frequency, voltage, current, power and fuel level, the modules provide engine and alternator protection. All this information is indicated on a large backlit LCD text display through a series of warning lights, electrical shutdown alarms and shutdown alarms in several languages. 

J1939 (CAN) converter, non-electronic MPU and alternator detection with support for diesel, gas and petrol engines, all in one variant. With a flexible number of inputs and outputs with their respective protections, the modules can easily be adapted to suit a wide range of applications.

Via USB communication both modules can be configured using the PC software DSE Configuration Suite or via the front panel editor of the module editor.

Using the DSE Configuration Suite the controller is easy to use and configure, allowing the operating parameters sequences, timers and alarms to be set or modified.

DSE 855 MODULE SPECIFICATIONS SUPPLY

CONTINUOUS VOLTAGE RATING

8 V to 35 V Continuous

CRANKING DROPOUTS

Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout

and supply recovers to 5 V. This is achieved without the need for internal

batteries. LEDs and backlight will not be maintained during cranking.

MAXIMUM OPERATING CURRENT

123 mA at 12 V

71 mA at 24 V

MAXIMUM STANDBY CURRENT

104 mA at 12 V

63 mA at 24 V

COMMUNICATIONS

USB (Single DSE Controller) Ethernet

DIMENSIONS

OVERALL

35 mm x 97 mm x 102 mm

1.4” x 3.8” x 4.0”

MOUNTING

DIN Rail

OPERATING TEMPERATURE RANGE

-30 °C to + 70 °C

-22 °F to + 158 °F

STORAGE TEMPERATURE RANGE

-40 °C to + 80 °C

-40 °F to + 176 °F

The DSE6110 MKIII is an Auto Start Control Module suitable for a wide variety of single, diesel or gas, genset applications.  

Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs and remote PC.

The module includes USB connection and dedicated DSENet® terminals for system expansion.

The module is compatible with electronic (CAN) and non-electronic (magnetic pick-up/alternator sensing) engines and offers an extensive number of flexible inputs, outputs and extensive engine protections so the system can be easily adapted to meet the most demanding industry requirements.

The DSE7410 MKII is an Auto Start Control Module  suitable for a wide
variety of single, diesel or gas, gen-set applications.

Monitoring an extensive number of engine parameters, the module will
display warnings, shutdown and engine status information on the
back-lit LCD screen, illuminated LEDs,remote PC and via SMS text alerts
(with external modem).

The module include USB, RS232, RS485 and Ethernet ports as well as dedicated DSENet® terminals for system expansion.

The module are compatible with electronic (CAN) and non-electronic (magnetic pick-up/alternator sensing)engines and offer an extensive number of flexible inputs, outputs and extensive engine protections so the system can be easily adapted to meet the most demanding industry requirements.

The extensive list of features includes enhanced event and performance monitoring, remote communications & PLC functionality.
Dual mutual standby is now available on the DSE7410 MKII using RS232 or RS485
communications. This provides for a simpler and more convenient installation with more advanced features such as true hours balancing.

SPECIFICATIONS

DC SUPPLY
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
5 V for up to 1 minute

CRANKING DROPOUTS
Able to survive 0 V for 100 mS, providing
supply was at least 10 V before dropout and
supply recovers to 5 V. This is achieved
without the need for internal batteries.
LEDs and backlight will not be maintained
during cranking.

MAXIMUM OPERATING CURRENT
510 mA at 12 V, 240 mA at 24 V

MAXIMUM STANDBY CURRENT
330 mA at 12 V, 160 mA at 24 V
CHARGE FAIL/EXCITATION RANGE
0 V to 35 V

GENERATOR & MAINS (UTILITY)
VOLTAGE RANGE
15 V to 415 V AC (Ph to N)
26 V to 719 V AC (Ph to Ph)
FREQUENCY RANGE
3.5 Hz to 75 Hz

MAGNETIC PICKUP
VOLTAGE RANGE
+/- 0.5 V to 70 V
FREQUENCY RANGE
10,000 Hz (max)

INPUTS
DIGITAL INPUTS A TO H
Negative switching
ANALOGUE INPUTS A, B, E & F
Configurable as:
Negative switching digital input
0 V to 10 V sensor
4 mA to 20 mA sensor
Resistive sensor
ANALOGUE INPUTS C & D
Configurable as:
Negative switching digital input
Resistive sensor

OUTPUTS
OUTPUT A & B (FUEL & START)
15 A DC at supply voltage
OUTPUTS C & D
8 A AC at 250
V AC (Volt-free)
AUXILIARY OUTPUTS E, F, G, H, I & J
2 A DC at supply voltage

DIMENSIONS
OVERALL
245 mm x 184 mm x 51 mm
9.6” x 7.2” x 2.0”
PANEL CUT-OUT
220 mm x 160 mm
8.7” x 6.3”
MAXIMUM PANEL THICKNESS
8 mm
0.3”

STORAGE TEMPERATURE RANGE
-40°C to +85 °C
-40 °F to +185 °F

OPERATING TEMPERATURE RANGE
NON-HEATED DISPLAY VARIANT
-30°C to +70 °C
-22 °F to +158 °F
HEATED DISPLAY VARIANT
-40 °C to +70 °C
-40 °F to +158 °F

The DSE3110 is an outstanding compact control module that provides a comprehensive range of features for single-set applications. The controller can be used in manual or auto start mode.

OVERALL SIZE

98 mm x 79 mm x 40 mm (3.9” x 3.1” x 1.6”)                                                

PANEL CUTOUT SIZE

80 mm x 68 mm (3.1 " x 2.7")

MAXIMUM PANEL THICKNESS

8.0 mm (0.3”)    

WEIGHT                   

0.16kg

DSEE100 Engine Only Control Module

The E100 is an Engine Only Control Module designed to provide flexible engine control with built-in monitoring and protection. The module is fully configurable for a wide range of applications including engine driven pumps and compressors.