Relay RLP/5-12 12V-40A Nagares

GTIN/EAN: 8436034410485

Compatible model: RELAY MODEL MR60 MAHLE 12V/40 A RLP/ 5-12

In stock available

News MAHLE - NAGARES

A wide AC/DC power supply range (24 to 230 VAC/ 24 to 48 VDC) reduces the number of timer models kept in stock. (24 to 230 VAC/VDC with H3DS-XL@)

• Smart Dial/Selector-locking Mechanism: Prevents the dials and selectors on the Timer’s front panel from being inadvertently operated or being operated without authorization. The lock can only be unlocked and locked with an optional pen-type Lock Key.

• Sticker provided for easy timer identification and management.

• Terminal clamp left open when delivered (screw terminal type). • Finger protection terminal block to meet VDE0106/P100.

• Enables easy sequence checks through instantaneous outputs for a zero set value at any time range.

• Incorporates environment-friendly, cadmium-free contacts.

• Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Voltage, and EMC Directives.

Electromechanical Relay 24VDC 636Ohm 5A 4PDT Socket General Purpose Relay

Industrial relay

Dimensions L x W x H: 28 x 21.5 x 36 mm

Temperature range: -55 ... +70 °C

Contact material: AgNi

Contacts: 4 Change-Over (CO)

Mounting: Plug-In

Protection rating: IP40

Pcoil: 900 mW

Rcoil: 636 Ohm

Ucoil: 24 VDC

Technical
Function:
Pluggable slim interface relay CR-S
Sub-Function:
Relay with standard contacts
Output:
1 c/o (SPDT) contact
Output Signal:
250 V / 6 A
Rated Control Supply Voltage (Us):
12 V DC
Environmental
Ambient Air Temperature:
Operation -40 … +85 °C
Storage 0 … +40 °C
RoHS Status:
Following EU Directive 2011/65/EC

Technical
Function:
Accessory for interface relays CR-S
Sub-Function:
Socket
Rated Control Supply Voltage (Us):
6 ... 24 V DC
Terminal Type:
Screw Terminals
Environmental
Ambient Air Temperature:
Operation -40 … +70 °C
Storage 0 … +40 °C
RoHS Status:
Following EU Directive 2011/65/EC
Technical UL/CSA
Connecting Capacity UL/CSA:
Flexible 14 AWG
Rigid 14 AWG
Tightening Torque UL/CSA:
4.42 in·lb

The new Tmax T7, available in two versions up to 1600 A either with manual operating mechanism or motor operator, was conceived with a really revolutionary design for circuit-breakers of this type: advanced electronics, exceptional performances and new installation and accessory fitting solutions.
Flexibility is absolutely exceptional with Tmax T7: they can be installed both vertically and horizontally (in the withdrawable version, too), there are all types of terminals (among which, flat orientated rear terminals) and a new, faster and safer racking-out system for the moving part. Moreover, cabling is considerably facilitated by the reduced height.
A great news is the new rapid accessory wiring system. No wires inside the circuit-breaker, rapid, simple and safe connection to the external circuit, and no screws for fixing the external power supply cables.
The exclusive news of the new cable interlock provides notable benefits in terms of optimal sizing. By using this accessory it is possible to interlock two circuit-breakers in any position and, above all, to interlock a T7 with an air circuit-breaker as well.
this answer is ideal for automatic transfer switch solutions.