LTS PANEL MONOPHASE 2 POLES 320 AMP | MOTORIZED SELECTOR

Switching only switchboard (LTS)

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

LTS PANEL THREE PHASE 4 POLES 160 AMP | MOTORIZED SELECTOR

Switching only switchboard (LTS)

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

Automatic Switching Switchboard (ATS)

Genset Components' ATS electrical panels are fitted with a DSE 334 type control unit which detects when there is a mains failure and sends a start signal to the generator set control unit.

Once started and ready, the DSE334 control unit of the electrical panel manoeuvres to allow the changeover of the electrical supply (which feeds the load of an installation) between the mains and the generating set and vice versa when the mains is re-established.

The switchgear consists of two motorised contactors or selectors fitted with mechanical and electrical interlocking.

This switchboard is applicable to any generating set equipped with any remote control or signal start control unit.

Characteristics:

Electric panel in metal cabinet with IP-67 protection degree.
Two motorised contactors or selectors (depending on the electrical panel model), fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.
Protection fuses.
Terminal block for the control and manoeuvre of the generating set.
Terminals for connecting the generator set input power cables, mains input and load output.
Connection wiring for all the electrical elements of the switchboard. Each cable identified with its reference number at each end for easy installation and configuration.
Battery charger.
Transformers
Emergency stop button.
Contact key (for power supply to the control panel).
Deep Sea Electronics 334 control unit.
Front door with key lock.
Bottom cover for cable access.
Approximate weight: 30kg

Dimensions of the electrical panel (mm): 700x500x260

All our electrical panels can be adapted to the customer's requirements.

LTS PANEL BIPHASIC 3 POLES 160 AMP | MOTORIZED SELECTOR

Switching only switchboard (LTS)

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.