LTS PANEL MONOPHASE 2 POLES 200 AMP  WITH CONTACTORS

Switching only switchboard (LTS)

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

LTS PANEL MONOPHASE 2 POLES 250 AMP WITH  CONTACTORS

Switching only switchboard (LTS)      

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

LTS PANEL BIPHASIC 3 POLES 400 AMP WITH MOTORIZED SELECTOR

Switching only switchboard (LTS) 

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

LTS PANEL BIPHASIC 3 POLES 630 AMP WITH MOTORIZED SELECTOR

Switching only switchboard (LTS) 

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

LTS PANEL BIPHASIC 3 POLES 800 AMP WITH MOTORIZED SELECTOR

Switching only switchboard (LTS) 

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

LTS PANEL THREE PHASE 4 POLES 400 AMP WITH MOTORIZED SELECTOR

Switching only switchboard (LTS)  

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

LTS PANEL THREE PHASE 4 POLES 630 AMP WITH MOTORIZED SELECTOR

Switching only switchboard (LTS)  

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

LTS PANEL THREE PHASE 4 POLES 800 AMP WITH MOTORIZED SELECTOR

Switching only switchboard (LTS)

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

AUTOMATIC TRANSFER SWITCH PANEL (ATS) 2 POLES SINGLE-PHASE 200 AMP CONTACTORS

Automatic switchboard (ATS)

Genset Components' ATS control panels have a DSE 334 control unit that detects when there is a mains failure and sends a start signal to the generator set control unit.

Once started and ready, the DSE334 switchboard control unit manoeuvres to allow the change of electrical supply (which feeds the load of an installation) between the electrical network and the generating set and vice versa when the network is re-established.

The commutation is made up of two motorised contactors or selectors with mechanical and electrical interlocking.

This electrical panel is applicable to any generating set that has any remote control central or start by signal.

Characteristics:

Electrical panel in metal cabinet with IP-67 protection degree.
Two motorized contactors or selectors (depending on the model of electrical panel), equipped with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.
Protection fuses.
Terminal block for controlling and manoeuvring the generating set.
Terminal block for the connections of the power cables for the input of the generating set, the input of the network and the output of the load.
Connection wiring of all the electrical elements of the panel. Each cable identified with its reference number at each end for easy installation and configuration.
Battery charger.
Transformers
Emergency stop button.
Contact key (for power supply to the control unit).
Deep Sea Electronics 334 control center.
Front door with locking key.
Bottom cover for cable access.
Approximate weight: 30kg          

Dimensions of electrical panel (mm): 700x500x260

All our electrical panels can be adapted to the customer's requirements.

Automatic switchboard (ATS)
Genset Components' ATS control panels have a DSE 334 control unit that detects when there is a mains failure and sends a start signal to the generator set control unit.

Once started and ready, the DSE334 switchboard control unit manoeuvres to allow the change of electrical supply (which feeds the load of an installation) between the electrical network and the generating set and vice versa when the network is re-established.

The commutation is made up of two motorised contactors or selectors with mechanical and electrical interlocking.

This electrical panel is applicable to any generating set that has any remote control central or start by signal.

Characteristics

Electrical panel in metal cabinet with IP-67 protection degree.
Two motorized contactors or selectors (depending on the model of electrical panel), equipped with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.
Protection fuses.
Terminal block for controlling and manoeuvring the generating set.
Terminal block for the connections of the power cables for the input of the generating set, the input of the network and the output of the load.
Connection wiring of all the electrical elements of the panel. Each cable identified with its reference number at each end for easy installation and configuration.
Battery charger.
Transformers
Emergency stop button.
Contact key (for power supply to the control unit).
Deep Sea Electronics 334 control center.
Front door with locking key.
Bottom cover for cable access.
Approximate weight: 30kg          

Dimensions of electrical panel (mm): 700x500x260