Automatic switchboard (ATS)
Genset Components' ATS control panels have a DSE 334 control unit that detects when there is a mains failure and sends a start signal to the generator set control unit.

Once started and ready, the DSE334 switchboard control unit manoeuvres to allow the change of electrical supply (which feeds the load of an installation) between the electrical network and the generating set and vice versa when the network is re-established.

The commutation is made up of two motorised contactors or selectors with mechanical and electrical interlocking.

This electrical panel is applicable to any generating set that has any remote control central or start by signal.

Characteristics

Electrical panel in metal cabinet with IP-67 protection degree.
Two motorized contactors or selectors (depending on the model of electrical panel), equipped with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.
Protection fuses.
Terminal block for controlling and manoeuvring the generating set.
Terminal block for the connections of the power cables for the input of the generating set, the input of the network and the output of the load.
Connection wiring of all the electrical elements of the panel. Each cable identified with its reference number at each end for easy installation and configuration.
Battery charger.
Transformers
Emergency stop button.
Contact key (for power supply to the control unit).
Deep Sea Electronics 334 control center.
Front door with locking key.
Bottom cover for cable access.
Approximate weight: 125kg          

Dimensions of electrical panel (mm): 1700x600x400
 

AUTOMATIC TRANSFER SWITCH PANEL (ATS) 3 POLES BIPHASIC 630 AMP | MOTORIZED SELECTOR  

Automatic switchboard (ATS)

Genset Components' ATS control panels have a DSE 334 control unit that detects when there is a mains failure and sends a start signal to the generator set control unit.

Once started and ready, the DSE334 switchboard control unit manoeuvres to allow the change of electrical supply (which feeds the load of an installation) between the electrical network and the generating set and vice versa when the network is re-established.

The commutation is made up of two motorised contactors or selectors with mechanical and electrical interlocking.

This electrical panel is applicable to any generating set that has any remote control central or start by signal.

Features:

-Electrical panel in metal cabinet with IP-67 protection degree.
-Two motorized contactors or selectors (depending on the model of electrical panel), equipped with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.
-Protection fuses.
-Terminal block for controlling and manoeuvring the generating set.
-Terminal block for the connections of the power cables for the input of the generating set, the input of the network and the output of the load.
-Connection wiring of all the electrical elements of the panel. Each cable identified with its reference number at each end for easy installation and configuration.
-Battery charger.
-Transformers
-Emergency stop button.
-Contact key (for power supply to the control unit).
-Deep Sea Electronics 334 control center.
-Front door with locking key.
-Bottom cover for cable access.

Approximate weight: 175kg          

Dimensions of electrical panel (mm): 1700x600x400
 

Automatic switchboard (ATS)
Genset Components' ATS control panels have a DSE 334 control unit that detects when there is a mains failure and sends a start signal to the generator set control unit.

Once started and ready, the DSE334 switchboard control unit manoeuvres to allow the change of electrical supply (which feeds the load of an installation) between the electrical network and the generating set and vice versa when the network is re-established.

The commutation is made up of two motorised contactors or selectors with mechanical and electrical interlocking.

This electrical panel is applicable to any generating set that has any remote control central or start by signal.

Characteristics

Electrical panel in metal cabinet with IP-67 protection degree.
Two motorized contactors or selectors (depending on the model of electrical panel), equipped with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.
Protection fuses.
Terminal block for controlling and manoeuvring the generating set.
Terminal block for the connections of the power cables for the input of the generating set, the input of the network and the output of the load.
Connection wiring of all the electrical elements of the panel. Each cable identified with its reference number at each end for easy installation and configuration.
Battery charger.
Transformers
Emergency stop button.
Contact key (for power supply to the control unit).
Deep Sea Electronics 334 control center.
Front door with locking key.
Bottom cover for cable access.
Approximate weight: 180kg          

Dimensions of electrical panel (mm): 1700x600x400
 

AUTOMATIC TRANSFER SWITCH PANEL (ATS) 3 POLES BIPHASIC 1250 AMP |  MOTORIZED SELECTOR 

Automatic switchboard (ATS)

Genset Components' ATS control panels have a DSE 334 control unit that detects when there is a mains failure and sends a start signal to the generator set control unit.

Once started and ready, the DSE334 switchboard control unit manoeuvres to allow the change of electrical supply (which feeds the load of an installation) between the electrical network and the generating set and vice versa when the network is re-established.

The commutation is made up of two motorised contactors or selectors with mechanical and electrical interlocking.

This electrical panel is applicable to any generating set that has any remote control central or start by signal.

FEATURES:

-Electrical panel in metal cabinet with IP-67 protection degree.
-Two motorized contactors or selectors (depending on the model of electrical panel), equipped with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.
-Protection fuses.
-Terminal block for controlling and manoeuvring the generating set.
-Terminal block for the connections of the power cables for the input of the generating set, the input of the network and the output of the load.
-Connection wiring of all the electrical elements of the panel. Each cable identified with its reference number at each end for easy installation and configuration.
-Battery charger.
-Transformers
-Emergency stop button.
-Contact key (for power supply to the control unit).
-Deep Sea Electronics 334 control center.
-Front door with locking key.
-Bottom cover for cable access.

Approximate weight: 210kg          

Dimensions of electrical panel (mm): 1700x600x400
 

Automatic switchboard (ATS)
Genset Components' ATS control panels have a DSE 334 control unit that detects when there is a mains failure and sends a start signal to the generator set control unit.

Once started and ready, the DSE334 switchboard control unit manoeuvres to allow the change of electrical supply (which feeds the load of an installation) between the electrical network and the generating set and vice versa when the network is re-established.

The commutation is made up of two motorised contactors or selectors with mechanical and electrical interlocking.

This electrical panel is applicable to any generating set that has any remote control central or start by signal.

Characteristics

Electrical panel in metal cabinet with IP-67 protection degree.
Two motorized contactors or selectors (depending on the model of electrical panel), equipped with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.
Protection fuses.
Terminal block for controlling and manoeuvring the generating set.
Terminal block for the connections of the power cables for the input of the generating set, the input of the network and the output of the load.
Connection wiring of all the electrical elements of the panel. Each cable identified with its reference number at each end for easy installation and configuration.
Battery charger.
Transformers
Emergency stop button.
Contact key (for power supply to the control unit).
Deep Sea Electronics 334 control center.
Front door with locking key.
Bottom cover for cable access.
Approximate weight: 335kg          

Dimensions of electrical panel (mm): 2100x1000x600
 

Automatic switchboard (ATS)
Genset Components' ATS control panels have a DSE 334 control unit that detects when there is a mains failure and sends a start signal to the generator set control unit.

Once started and ready, the DSE334 switchboard control unit manoeuvres to allow the change of electrical supply (which feeds the load of an installation) between the electrical network and the generating set and vice versa when the network is re-established.

The commutation is made up of two motorised contactors or selectors with mechanical and electrical interlocking.

This electrical panel is applicable to any generating set that has any remote control central or start by signal.

Characteristics

Electrical panel in metal cabinet with IP-67 protection degree.
Two motorized contactors or selectors (depending on the model of electrical panel), equipped with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.
Protection fuses.
Terminal block for controlling and manoeuvring the generating set.
Terminal block for the connections of the power cables for the input of the generating set, the input of the network and the output of the load.
Connection wiring of all the electrical elements of the panel. Each cable identified with its reference number at each end for easy installation and configuration.
Battery charger.
Transformers
Emergency stop button.
Contact key (for power supply to the control unit).
Deep Sea Electronics 334 control center.
Front door with locking key.
Bottom cover for cable access.
Approximate weight: 370kg          

Dimensions of electrical panel (mm): 2100x1000x600
 

Automatic switchboard (ATS)
Genset Components' ATS control panels have a DSE 334 control unit that detects when there is a mains failure and sends a start signal to the generator set control unit.

Once started and ready, the DSE334 switchboard control unit manoeuvres to allow the change of electrical supply (which feeds the load of an installation) between the electrical network and the generating set and vice versa when the network is re-established.

The commutation is made up of two motorised contactors or selectors with mechanical and electrical interlocking.

This electrical panel is applicable to any generating set that has any remote control central or start by signal.

Characteristics

Electrical panel in metal cabinet with IP-67 protection degree.
Two motorized contactors or selectors (depending on the model of electrical panel), equipped with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.
Protection fuses.
Terminal block for controlling and manoeuvring the generating set.
Terminal block for the connections of the power cables for the input of the generating set, the input of the network and the output of the load.
Connection wiring of all the electrical elements of the panel. Each cable identified with its reference number at each end for easy installation and configuration.
Battery charger.
Transformers
Emergency stop button.
Contact key (for power supply to the control unit).
Deep Sea Electronics 334 control center.
Front door with locking key.
Bottom cover for cable access.
Approximate weight: 370kg          

Dimensions of electrical panel (mm): 2100x1000x600
 

Automatic switchboard (ATS)
Genset Components' ATS control panels have a DSE 334 control unit that detects when there is a mains failure and sends a start signal to the generator set control unit.

Once started and ready, the DSE334 switchboard control unit manoeuvres to allow the change of electrical supply (which feeds the load of an installation) between the electrical network and the generating set and vice versa when the network is re-established.

The commutation is made up of two motorised contactors or selectors with mechanical and electrical interlocking.

This electrical panel is applicable to any generating set that has any remote control central or start by signal.

Characteristics

Electrical panel in metal cabinet with IP-67 protection degree.
Two motorized contactors or selectors (depending on the model of electrical panel), equipped with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.
Protection fuses.
Terminal block for controlling and manoeuvring the generating set.
Terminal block for the connections of the power cables for the input of the generating set, the input of the network and the output of the load.
Connection wiring of all the electrical elements of the panel. Each cable identified with its reference number at each end for easy installation and configuration.
Battery charger.
Transformers
Emergency stop button.
Contact key (for power supply to the control unit).
Deep Sea Electronics 334 control center.
Front door with locking key.
Bottom cover for cable access.
Approximate weight: 385kg          

Dimensions of electrical panel (mm): 2100x1000x600
 

4-POLE THREE-PHASE 25 AMP AUTOMATIC SWITCHGEAR (ATS) WITH

 CONTACTORS

This panel has a switchboard type DSE334 that detects when a mains failure occurs and sends a start-up signal to the switchboard type DSE3110, DSE6010 MKII, DSE7310 MKII or similar on the genset. Once turned on and ready, the DSE334 panel switchboard operates to enable the change of power supply (supplying the load of a facility) between the mains and the generator set and vice versa when the mains are restored. The transfer switch is formed by two contactors or motor driven selectors equipped with MECHANICAL AND ELECTRICAL INTER-LOCK. This panel applies to any generator set featuring any switchboard with remote control / start-up by signal feature.