Witching only switchboard (LTS)

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

Witching only switchboard (LTS)

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

LTS PANEL THREE PHASE 4 POLES 45 AMP WITH CONTACTORS

Witching only switchboard (LTS)

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

LTS PANEL THREE-PHASE 4 POLES 100 AMP WITH CONTACTORS

Switching only switchboard (LTS)

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

LTS PANEL THREE-PHASE 4 POLES 125 AMP WITH CONTACTORS

Switching only switchboard (LTS)

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

LTS PANEL THREE PHASE 4 POLES 400 AMP WITH MOTORIZED SELECTOR

Switching only switchboard (LTS)  

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

LTS PANEL THREE PHASE 4 POLES 630 AMP WITH MOTORIZED SELECTOR

Switching only switchboard (LTS)  

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

LTS PANEL THREE PHASE 4 POLES 800 AMP WITH MOTORIZED SELECTOR

Switching only switchboard (LTS)

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

LTS PANEL THREE PHASE 4 POLES 1250 AMP WITH MOTORIZED SELECTOR

Switching only switchboard (LTS)

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.

LTS PANEL THREE PHASE 4 POLES 1600 AMP WITH MOTORIZED SELECTOR

Switching only switchboard (LTS)

Automatic switching or transfer between the grid and the generator/generator set/electric power supply.

We manufacture electrical panels with the best equipment and technology demanded by the market at all times.

With electromagnetic compatibility certificate (Directive 2014/30/EU) and low voltage (Directive 2014/35/EU).

Switching only switchboard function (LTS)

Allows the changeover of the electrical supply (feeding the load of an installation) between the mains and the generator.

The switching consists of contactors, motorised selectors or thermal magnet switches fitted with mechanical and electrical interlocking.

The switching originates from the control unit (controller) installed in the generating set.

This control panel is applicable to all generators equipped with any central unit with AMF (Automatic Mains Failure) function.

Our electrical panels come in a metal cabinet with IP-67 protection degree, which contains the following elements:

- Two contactors or motorised selector switches, fitted with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.

- Protection fuses.

- Terminal block for the connection of the control signals coming from the generator.

- Terminal block for the connection of the generator power cables, mains input and load output.

- Connection wiring for all the electrical elements of the panel. Each cable identified with its reference number at each end.

- Emergency stop button.

- Front door with key for locking.

- Lower cover for cable access to the electrical panel.

Our electrical panels are the perfect complement to any generator set.

All Genset Components electrical panels are protected against direct contact with live parts when the electrical panel door is open.

All our electrical panels can be adapted to the customer's requirements.