Connecting your RS-485 network using Belden cable ensures increased network flexibility and performance. Belden offers the industry's widest range of RS-485 cable options.

These range from power limited tray cable (PLTC) and plenum (CMP) rated cable to low smoke zero halogen cable (see the table below for a complete listing).

These communication cables are ideally suited for connecting computer and automation systems and are backed by our 10-year product warranty.

24 AWG stranded (7x32) TC conductors, polyethylene insulation, twisted pairs, overall Beldfoil® (100% coverage) + TC braid shield (90% coverage), 24 AWG stranded TC drain wire, PVC jacket.

Relay RLP/5-12 12V-40A Nagares

GTIN/EAN: 8436034410485

Compatible model: RELAY MODEL MR60 MAHLE 12V/40 A RLP/ 5-12

In stock available

News MAHLE - NAGARES

The new Tmax T7, available in two versions up to 1600 A either
with manual operating mechanism or motor operator, was conceived with a really revolutionary design for circuit-breakers of
this type: advanced electronics, exceptional performances and
new installation and accessory fitting solutions.

Flexibility is absolutely exceptional with Tmax T7: they can be
installed both vertically and horizontally (in the withdrawable
version, too), there are all types of terminals (among which, flat
orientated rear terminals) and a new, faster and safer racking-out
system for the moving part. Moreover, cabling is considerably
facilitated by the reduced height.

A great news is the new rapid accessory wiring system. No wires
inside the circuit-breaker, rapid, simple and safe connection to
the external circuit, and no screws for fixing the external power
supply cables.

The exclusive news of the new cable interlock provides notable
benefits in terms of optimal sizing. By using this accessory it is
possible to interlock two circuit-breakers in any position and,
above all, to interlock a T7 with an air circuit-breaker as well.
Impossible until today, this answer is ideal for automatic transfer
switch solutions.

General Information:

Product Type ACC
220 ... 250 V AC
220 ... 250 V DC
Rated Voltage (Ur)
Standards IEC
Suitable For T4, T5
Suitable for Product Class SACE Tmax T
Product Net Weight: 2.2 kg

A wide AC/DC power supply range (24 to 230 VAC/ 24 to 48 VDC) reduces the number of timer models kept in stock. (24 to 230 VAC/VDC with H3DS-XL@)

• Smart Dial/Selector-locking Mechanism: Prevents the dials and selectors on the Timer’s front panel from being inadvertently operated or being operated without authorization. The lock can only be unlocked and locked with an optional pen-type Lock Key.

• Sticker provided for easy timer identification and management.

• Terminal clamp left open when delivered (screw terminal type). • Finger protection terminal block to meet VDE0106/P100.

• Enables easy sequence checks through instantaneous outputs for a zero set value at any time range.

• Incorporates environment-friendly, cadmium-free contacts.

• Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Voltage, and EMC Directives.

Electromechanical Relay 24VDC 636Ohm 5A 4PDT Socket General Purpose Relay

Industrial relay

Dimensions L x W x H: 28 x 21.5 x 36 mm

Temperature range: -55 ... +70 °C

Contact material: AgNi

Contacts: 4 Change-Over (CO)

Mounting: Plug-In

Protection rating: IP40

Pcoil: 900 mW

Rcoil: 636 Ohm

Ucoil: 24 VDC