Control Module DSE 7410 MKII Auto start 7410-03 Deep Sea Electronics

The DSE7410 MKII is an Auto Start Control Module  suitable for a wide
variety of single, diesel or gas, gen-set applications.

Monitoring an extensive number of engine parameters, the module will
display warnings, shutdown and engine status information on the
back-lit LCD screen, illuminated LEDs,remote PC and via SMS text alerts
(with external modem).

The module include USB, RS232, RS485 and Ethernet ports as well as dedicated DSENet® terminals for system expansion.

The module are compatible with electronic (CAN) and non-electronic (magnetic pick-up/alternator sensing)engines and offer an extensive number of flexible inputs, outputs and extensive engine protections so the system can be easily adapted to meet the most demanding industry requirements.

The extensive list of features includes enhanced event and performance monitoring, remote communications & PLC functionality.
Dual mutual standby is now available on the DSE7410 MKII using RS232 or RS485
communications. This provides for a simpler and more convenient installation with more advanced features such as true hours balancing.

SPECIFICATIONS

DC SUPPLY
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
5 V for up to 1 minute

CRANKING DROPOUTS
Able to survive 0 V for 100 mS, providing
supply was at least 10 V before dropout and
supply recovers to 5 V. This is achieved
without the need for internal batteries.
LEDs and backlight will not be maintained
during cranking.

MAXIMUM OPERATING CURRENT
510 mA at 12 V, 240 mA at 24 V

MAXIMUM STANDBY CURRENT
330 mA at 12 V, 160 mA at 24 V
CHARGE FAIL/EXCITATION RANGE
0 V to 35 V

GENERATOR & MAINS (UTILITY)
VOLTAGE RANGE
15 V to 415 V AC (Ph to N)
26 V to 719 V AC (Ph to Ph)
FREQUENCY RANGE
3.5 Hz to 75 Hz

MAGNETIC PICKUP
VOLTAGE RANGE
+/- 0.5 V to 70 V
FREQUENCY RANGE
10,000 Hz (max)

INPUTS
DIGITAL INPUTS A TO H
Negative switching
ANALOGUE INPUTS A, B, E & F
Configurable as:
Negative switching digital input
0 V to 10 V sensor
4 mA to 20 mA sensor
Resistive sensor
ANALOGUE INPUTS C & D
Configurable as:
Negative switching digital input
Resistive sensor

OUTPUTS
OUTPUT A & B (FUEL & START)
15 A DC at supply voltage
OUTPUTS C & D
8 A AC at 250
V AC (Volt-free)
AUXILIARY OUTPUTS E, F, G, H, I & J
2 A DC at supply voltage

DIMENSIONS
OVERALL
245 mm x 184 mm x 51 mm
9.6” x 7.2” x 2.0”
PANEL CUT-OUT
220 mm x 160 mm
8.7” x 6.3”
MAXIMUM PANEL THICKNESS
8 mm
0.3”

STORAGE TEMPERATURE RANGE
-40°C to +85 °C
-40 °F to +185 °F

OPERATING TEMPERATURE RANGE
NON-HEATED DISPLAY VARIANT
-30°C to +70 °C
-22 °F to +158 °F
HEATED DISPLAY VARIANT
-40 °C to +70 °C
-40 °F to +158 °F