Thermostat NA+NC ELDON (ETR200)

Description:

This adjustable temperature thermostat, ETR200, for any enclosure, with either a normally open (NO) and normally closed (NC) contact, is used to control installed devices. Such devices could be a filter fan or a fan heater, that should turn on or off at the required temperature level, set by the user. The result is reduced operational cost. The product's versatility is high, since either cooling or heating can be controlled by the two different types of contacts that are housed within the same thermostat.

Material:

Plastic according to UL94 V-0.

Setting range:

0 °C to +60 °C. Switching temperature difference less than 3 °K, and switching point tolerance ±3 °K.

Capacidad de corte:

NC contact, 100-250 V AC, 10(2) A. NO contact, 100-250 V AC, 5(2) A, for 230 V AC operation only. 24 V DC, 30 W. Value in brackets for inductive load.

Operating temperature:

-20 °C a +80 °C.

Service life:

> 100.000 cylces.

Connection:

Screw terminal for cable (0.5 to 2.5 mm²).

Protection:

IP 20.

Approvals:

CE, EAC, cULus_UL Listed.

Finish:

RAL 7035.

Pack quantity:

1 Piece.